<div dir="ltr">Re-sending the shop list announcement ATrain made as it skipped my inbox, and likely other's as well. I will use this for all shop-related e-mails going forward. I'm also ccing that list so this thread cross-posts there - from now on just delete "<a href="mailto:members@hacklab.to">members@hacklab.to</a>" from the replies to my e-mail and then this thread will continue in the location it should be - <a href="mailto:shop@hacklab.to">shop@hacklab.to</a>.<div><br></div><div>Shop list subscription instructions (from ATrain's June 24 message):<br><div><br></div><div><div style="font-size:12.8px"><div><div>Hello Hacklab, There's a new <span class="">mailing</span> <span class="">list</span> for the <span class="">shop</span>! <a href="https://lists.hacklab.to/cgi-bin/mailman/listinfo/shop" target="_blank">https://lists.hacklab.to/cgi-bin/mailman/listinfo/<span class="">shop</span></a><br></div><br></div>The intention is to move general <span class="">shop</span> related discussion to a separate <span class="">list</span>; in order to reduce the noise on the main <span class="">mailing</span> <span class="">list</span>. This<span class="">list</span> can be used for anything <span class="">shop</span>-related, such as equipment wishlist, training, maintenance, and project ideas / advice..<br><br><br></div><div style="font-size:12.8px"></div><div style="font-size:12.8px">Major <span class="">shop</span> announcements will still be broadcast over the normal channels; but otherwise please only discuss <span class="">shop</span> stuff on this <span class="">list</span>. (eg: "<span class="">Shop</span> is on fire, please bring a fire extinguisher at your soonest convenience" would still go out to members@)</div></div><div class="gmail_extra"><br><div class="gmail_quote">On Mon, Jul 4, 2016 at 2:23 PM, MP via Members <span dir="ltr"><<a href="mailto:members@hacklab.to" target="_blank">members@hacklab.to</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div>FYI:</div><div>Drill press mounting holes are ready,</div><div>I will finish the job in the evening.</div><div> </div><div>==============================</div><div> </div><div> </div><div> </div><div> </div><div>03.07.2016, 13:08, "Ahron Train" <<a href="mailto:superatrain@gmail.com" target="_blank">superatrain@gmail.com</a>>:</div><div class="HOEnZb"><div class="h5"><blockquote type="cite"><div><div>There's already a new soft cord on it. It will not be hard-wired. Really all that's left electrically is hooking up the new switch.<br><br></div>The mill is already bolted to the floor with those same sleeve bolts - The mill is bolted flush to the ground with them; but the drill press is raised another 1.5" - 2" or so off the ground; hence needing longer bolts. Let's just reuse the existing bolts unless there's something obviously wrong with them...</div><div><br><div><div data-smartmail="gmail_signature">A Train</div></div><br><div>On Sun, Jul 3, 2016 at 12:36 PM, MP via Members <span><<a href="mailto:members@hacklab.to" target="_blank">members@hacklab.to</a>></span> wrote:<br><blockquote style="margin:0 0 0 0.8ex;border-left:1px #ccc solid;padding-left:1ex">I think that the new press drill should **not** be **permanently** wired to the power supply system.<br> The motor is not too big and regular electric outlet will be enough for start-n-stop loading mode.<br> So we heed a flexible cable with proper protection and electrical plug.<br> Q1: Do have it in the Lab or it should be purchased separately.<br> <br> Our Lab is on second floor. I do not know how thick our concrete floor is.<br> But I do not trust it at all, everything is shaking when I jump in the workshop.<br> The "original" screws (I think) are too long, we can easily drill though to the fist floor if we will use them.<br> I agree we should use something like these:<br> <a href="https://www.homedepot.ca/en/home/p.papc-12x4-dynabolt-sleeve-anchors.1000403378.html" target="_blank">https://www.homedepot.ca/en/home/p.papc-12x4-dynabolt-sleeve-anchors.1000403378.html</a><br> <a href="https://www.homedepot.ca/en/home/p.papc-12x5-12-trubolt-wedge-anchors.1000403374.html" target="_blank">https://www.homedepot.ca/en/home/p.papc-12x5-12-trubolt-wedge-anchors.1000403374.html</a><br> <a href="https://www.homedepot.ca/en/home/p.papc-12x7-wedge-anchors-1pc.1000409728.html" target="_blank">https://www.homedepot.ca/en/home/p.papc-12x7-wedge-anchors-1pc.1000409728.html</a><br> We already have two of the 1/2"x4" anchors in the workshop. The press drill can not fall to the left/right/back<br> So we can use two 1/2"x4 as a front anchors and two 1/2"x5 as a rear anchors.<br> Q2: Do we have 1/2" diamond drill bit? (I do not have such big bit)<br> Q3: Do we have hand drill / hummer drill?<br> <br> The rest is clear for me and I will do it, I will have spare time today afternoon and tomorrow.<br> <br> <br> ==============================<br> <br> <br> <br> 03.07.2016, 09:34, "Igor Yeremin via Members" <<a href="mailto:members@hacklab.to" target="_blank">members@hacklab.to</a>>:<br><div><div>> The old screws from the press are in the cardboard box with the pulleys,<br> > not sure if they can be reused.<br> ><br> > On <span>2016-07-03 1</span>:55 AM, Ahron Train via Members wrote:<br> >> The sander & band saw are ready to go. They are on wheels, so just pull<br> >> them out if you need them.<br> >><br> >> The drill press needs to be rewired (I started this today) and a new<br> >> switch (I broke the old one on disassembly) It also needs to be bolted<br> >> to the floor - this requires a hammer drill; and some fairly long sleeve<br> >> anchors (longer than the ones the lab has currently, somewhere around<br> >> 4-6" I suspect.)<br> >><br> >> Feel free to take on either of the above tasks!<br> >><br> >> On Sat, Jul 2, 2016 at 11:49 PM, MP via Members <<a href="mailto:members@hacklab.to" target="_blank">members@hacklab.to</a><br> >> <mailto:<a href="mailto:members@hacklab.to" target="_blank">members@hacklab.to</a>>> wrote:<br> >><br> >> Hello workshop hackers.<br> >><br> >> I was sick last week, now I am back to normal. I visited the Lab today.<br> >> As I can see we are 80% done with the "Upgrade shop tools" project.<br> >> Who is doing the installation? Do we have any plan for the final push?<br> >> I would like to join the installation team (even if the team has one<br> >> person only) rather that stick my nose in the middle of somebody's<br> >> else job.<br> >><br> >> ==============================<br> >><br> >> 26.06.2016, 10:19, "Igor Yeremin via Members" <<a href="mailto:members@hacklab.to" target="_blank">members@hacklab.to</a><br> >> <mailto:<a href="mailto:members@hacklab.to" target="_blank">members@hacklab.to</a>>>:<br> >> > Yay! All funded! \o/<br> >> > Thank everyone for contributing!<br> >> > Please send either Interac or PayPal to <a href="mailto:igor.yeremin@gmail.com" target="_blank">igor.yeremin@gmail.com</a><br> >> <mailto:<a href="mailto:igor.yeremin@gmail.com" target="_blank">igor.yeremin@gmail.com</a>><br> >> > I will also be around Hacklab today (Junk Independence Day!) and on<br> >> > Tuesday to accept cash.<br> >> ><br> >> > Now we need to figure out transportation. The machines are not<br> >> large and<br> >> > can be disassembled into smaller parts, so all of them would fit in a<br> >> > van or a truck no problem.<br> >> > Who has such a vehicle available between now and Wednesday?<br> >> ><br> >> > Igor<br> >> ><br> >> > On <span>2016-06-26 9</span>:29 AM, Jack Stainton wrote:<br> >> >> Since I was going to put my funds in for the drill press, allow<br> >> me to<br> >> >> fill the gap for the sander instead! $15 for the sander! :3<br> >> >><br> >> >> -Jack<br> >> >><br> >> >> On Sun, Jun 26, 2016, 9:27 AM Igor Yeremin via Members<br> >> >> <<a href="mailto:members@hacklab.to" target="_blank">members@hacklab.to</a> <mailto:<a href="mailto:members@hacklab.to" target="_blank">members@hacklab.to</a>><br> >> <mailto:<a href="mailto:members@hacklab.to" target="_blank">members@hacklab.to</a> <mailto:<a href="mailto:members@hacklab.to" target="_blank">members@hacklab.to</a>>>> wrote:<br> >> >><br> >> >> Excellent!<br> >> >> Two more people mailed me off-list:<br> >> >> Dave +20 drill press<br> >> >> Ravi +25 band saw<br> >> >><br> >> >> That makes the drill $20 over-funded, so I will move my<br> >> drill $20 to the<br> >> >> sander.<br> >> >> Eric's contribution funds the last $30 of the band saw, and<br> >> $20 of the<br> >> >> sander.<br> >> >><br> >> >> Drill press: funded!<br> >> >> Band saw: funded!<br> >> >> Sander: needs another $15<br> >> >><br> >> >> On <span>2016-06-26 9</span>:20 AM, Eric Boyd via Members wrote:<br> >> >> > I'm in for $50. Really I want to support the new drill<br> >> press, that's<br> >> >> > the thing I will use, but happy to have my money go<br> >> towards the others<br> >> >> > too, so count me towards the band saw.<br> >> >> ><br> >> >> > Eric<br> >> >> ><br> >> >> > On 6/26/16 1:28 AM, MP via Members wrote:<br> >> >> >> As I can see our balance is following :<br> >> >> >> Drill press. Needed $150 funded $150<br> >> >> >> 50 Alan<br> >> >> >> 10 Will<br> >> >> >> 20 Igor<br> >> >> >> 50 Agron<br> >> >> >> 20 MikeP<br> >> >> >><br> >> >> >> Band saw. Needed $150 funded $95<br> >> >> >> 20 Igor<br> >> >> >> 25 Trevor<br> >> >> >> 50 MikeP<br> >> >> >><br> >> >> >> Sender. Needed $150 funded $95<br> >> >> >> 50 Ahron<br> >> >> >> 20 Igor<br> >> >> >> 25 Trevor.<br> >> >> >><br> >> >> >> ..<br> >> >> >><br> >> >> >> 00:51, June 26, 2016, Trevor McKee via Members<br> >> >> <<a href="mailto:members@hacklab.to" target="_blank">members@hacklab.to</a> <mailto:<a href="mailto:members@hacklab.to" target="_blank">members@hacklab.to</a>><br> >> <mailto:<a href="mailto:members@hacklab.to" target="_blank">members@hacklab.to</a> <mailto:<a href="mailto:members@hacklab.to" target="_blank">members@hacklab.to</a>>>>:<br> >> >> >><br> >> >> >> I'm in for $50 towards whichever one needs it, they all<br> >> sound<br> >> >> >> useful. depending on timing I may be able to help with<br> >> >> >> transportation too.<br> >> >> >> On Jun 25, 2016 21:07, "Igor Yeremin via Members"<br> >> >> >> <<a href="mailto:members@hacklab.to" target="_blank">members@hacklab.to</a> <mailto:<a href="mailto:members@hacklab.to" target="_blank">members@hacklab.to</a>><br> >> <mailto:<a href="mailto:members@hacklab.to" target="_blank">members@hacklab.to</a> <mailto:<a href="mailto:members@hacklab.to" target="_blank">members@hacklab.to</a>>>> wrote:<br> >> >> >><br> >> >> >> My neighbor is feeling better and I finally got a chance to<br> >> >> >> speak to him. He agreed to $150 each for the band saw, the<br> >> >> >> drill press and the sander.<br> >> >> >><br> >> >> >> The band saw comes with half dozen different blades of<br> >> >> >> different widths and pitches for different materials. The<br> >> >> >> sander comes with several new and used belts and discs.<br> >> >> >><br> >> >> >> This floor-standing drill press looks in better condition<br> >> >> than<br> >> >> >> Bill's, plus it has the extra table travel and comes with a<br> >> >> >> drill vise.<br> >> >> >><br> >> >> >> I'm interested in all three of those tools and will kick in<br> >> >> >> $60, $20 for each tool.<br> >> >> >> Other contributors so far:<br> >> >> >> Alan - drill press, $50<br> >> >> >> Will - drill press, $10<br> >> >> >> Who else is in?<br> >> >> >><br> >> >> >> My neighbor needs to close shop by the end of the month, so<br> >> >> >> the machines would need to be picked up before Thursday.<br> >> >> >><br> >> >> >> Igor<br> >> >> >><br> >> >> >> On <span>2016-06-20 5</span>:55 PM, Bill Jackson via Members wrote:<br> >> >> >><br> >> >> >> I have this drill press to donate, about 20 years old,<br> >> >> >> works OK<br> >> >> >><br> >> >> >> <a href="http://imgur.com/a/CcrT5" target="_blank">http://imgur.com/a/CcrT5</a><br> >> >> >><br> >> >> >> Bill Jackson<br> >> >> >> <a href="tel:416%20399%204567" target="_blank">416 399 4567</a> <tel:416%20399%204567><br> >> >> >><br> >> >> >> On Mon, Jun 20, 2016 at 5:00 PM, MP via Members<br> >> >> >> <<a href="mailto:members@hacklab.to" target="_blank">members@hacklab.to</a> <mailto:<a href="mailto:members@hacklab.to" target="_blank">members@hacklab.to</a>><br> >> <mailto:<a href="mailto:members@hacklab.to" target="_blank">members@hacklab.to</a> <mailto:<a href="mailto:members@hacklab.to" target="_blank">members@hacklab.to</a>>><br/><br> >> >> <mailto:<a href="mailto:members@hacklab.to" target="_blank">members@hacklab.to</a> <mailto:<a href="mailto:members@hacklab.to" target="_blank">members@hacklab.to</a>><br> >> <mailto:<a href="mailto:members@hacklab.to" target="_blank">members@hacklab.to</a> <mailto:<a href="mailto:members@hacklab.to" target="_blank">members@hacklab.to</a>>>>> wrote:<br> >> >> >><br> >> >> >> Well... we are talking drill press... drill press...<br> >> >> >> I am voting for a drill press as a #1 priority<br> >> >> >> BUT<br> >> >> >> Did anybody examined **that** drill press?<br> >> >> >> I would rather put $50 instead of $10 but I want a<br> >> >> >> GOOD drill press<br> >> >> >> without any compromise.<br> >> >> >><br> >> >> >> ==============================<br> >> >> >><br> >> >> ><br> >> >> ><br> >> >> ><br> >> >> > _______________________________________________<br> >> >> > Members mailing list<br> >> >> > <a href="mailto:Members@hacklab.to" target="_blank">Members@hacklab.to</a> <mailto:<a href="mailto:Members@hacklab.to" target="_blank">Members@hacklab.to</a>><br> >> <mailto:<a href="mailto:Members@hacklab.to" target="_blank">Members@hacklab.to</a> <mailto:<a href="mailto:Members@hacklab.to" target="_blank">Members@hacklab.to</a>>><br> >> >> > <a href="https://lists.hacklab.to/cgi-bin/mailman/listinfo/members" target="_blank">https://lists.hacklab.to/cgi-bin/mailman/listinfo/members</a><br> >> >> ><br> >> >> _______________________________________________<br> >> >> Members mailing list<br> >> >> <a href="mailto:Members@hacklab.to" target="_blank">Members@hacklab.to</a> <mailto:<a href="mailto:Members@hacklab.to" target="_blank">Members@hacklab.to</a>><br> >> <mailto:<a href="mailto:Members@hacklab.to" target="_blank">Members@hacklab.to</a> <mailto:<a href="mailto:Members@hacklab.to" target="_blank">Members@hacklab.to</a>>><br> >> >> <a href="https://lists.hacklab.to/cgi-bin/mailman/listinfo/members" target="_blank">https://lists.hacklab.to/cgi-bin/mailman/listinfo/members</a><br> >> >><br> >> >> --<br> >> >><br> >> >> -Jack<br> >> ><br> >> > _______________________________________________<br> >> > Members mailing list<br> >> > <a href="mailto:Members@hacklab.to" target="_blank">Members@hacklab.to</a> <mailto:<a href="mailto:Members@hacklab.to" target="_blank">Members@hacklab.to</a>><br> >> > <a href="https://lists.hacklab.to/cgi-bin/mailman/listinfo/members" target="_blank">https://lists.hacklab.to/cgi-bin/mailman/listinfo/members</a><br> >> _______________________________________________<br> >> Members mailing list<br> >> <a href="mailto:Members@hacklab.to" target="_blank">Members@hacklab.to</a> <mailto:<a href="mailto:Members@hacklab.to" target="_blank">Members@hacklab.to</a>><br> >> <a href="https://lists.hacklab.to/cgi-bin/mailman/listinfo/members" target="_blank">https://lists.hacklab.to/cgi-bin/mailman/listinfo/members</a><br> >><br> >> _______________________________________________<br> >> Members mailing list<br> >> <a href="mailto:Members@hacklab.to" target="_blank">Members@hacklab.to</a><br> >> <a href="https://lists.hacklab.to/cgi-bin/mailman/listinfo/members" target="_blank">https://lists.hacklab.to/cgi-bin/mailman/listinfo/members</a><br> ><br> > _______________________________________________<br> > Members mailing list<br> > <a href="mailto:Members@hacklab.to" target="_blank">Members@hacklab.to</a><br> > <a href="https://lists.hacklab.to/cgi-bin/mailman/listinfo/members" target="_blank">https://lists.hacklab.to/cgi-bin/mailman/listinfo/members</a><br> _______________________________________________<br> Members mailing list<br> <a href="mailto:Members@hacklab.to" target="_blank">Members@hacklab.to</a><br> <a href="https://lists.hacklab.to/cgi-bin/mailman/listinfo/members" target="_blank">https://lists.hacklab.to/cgi-bin/mailman/listinfo/members</a></div></div></blockquote></div></div></blockquote></div></div><br>_______________________________________________<br>
Members mailing list<br>
<a href="mailto:Members@hacklab.to">Members@hacklab.to</a><br>
<a href="https://lists.hacklab.to/cgi-bin/mailman/listinfo/members" rel="noreferrer" target="_blank">https://lists.hacklab.to/cgi-bin/mailman/listinfo/members</a><br>
<br></blockquote></div><br></div></div></div>