<div dir="auto"><div style="font-family:sans-serif;font-size:12.8px" dir="auto"><div style="height:87px"><span style="font-size:12.8px">Hey people who use the milling machine. </span></div><div style="height:87px" dir="auto"><span style="font-size:12.8px">Someone or many someone's haven't been careful eno</span><span style="font-size:12.8px">ugh with installing the drawbar into the collets.</span></div><div style="margin:16px 0px"><div dir="auto"><div dir="auto">1. The threads on the left/bottom are trashed, so we had to fabricate a new drawbar from scratch (and an inkjet printer).</div><div dir="auto">Please start the threads carefully by hand.</div><div dir="auto">Please only hit the drawbar with soft hammers, and only while threaded into the collet, not just sitting loose on top. </div><div dir="auto">2. The collets MUST be clean, and the socket on the mill must be cleaned before installing a collet. </div><div dir="auto">The drill collet on the left/bottom is in very poor shape and should be replaced. We won't due to cost, so we just want everyone to be aware and take steps to preserve our tools in good working order as long as possible. </div><div dir="auto"><br></div><div dir="auto">Thanks,</div><div dir="auto">Your friendly neighborhood shop hackers.<br></div></div></div></div></div>