[darkroom] C41 Drying

[Brendan Seabrook]

Hi all,

Tried C-41 for the first time. Looks to be all good.

Only problem I had was the flim reverse buckled (emulsion side out), The
manual indicates this is because drying was not warm enough. Given it was
dried at room temp this rings true. Anyone else have this problem?

I might look into what would be the minimum viable drying setup.

Brendan

PS. I dev'ed 2 rolls of 135x26 (short rolls). Not sure if that counts as 1
or 2 rolls so I marked 2.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hacklab.to/pipermail/darkroom/attachments/20150228/a2e9bbeb/attachment.html>